Commission on Science and Technology for Sustainable Development in the South (COMSATS)

The Workshop on Metrology for the Least Developed Countries held in Turkey

Home   /   The Workshop on Metrology for the Least Developed Countries held in Turkey

The Workshop on Metrology for the Least Developed Countries was successfully held on 26 – 27 November 2018, in Gebze-Kocaeli, Turkey. The workshop was jointly organized by the Commission on Science and Technology for Sustainable Development in the South (COMSATS) and the TUBITAK National Metrology Institute (TUBITAK UME), Turkey.

The primary objective of the workshop was to enhance the knowledge-base, expertise and capacity of the institutions working in the field of metrology in the least developed countries, as well as to prepare roadmaps towards addressing their needs to develop metrology infrastructures with the capability of supporting their economies.

Hosted by TUBITAK National Metrology Institute, the workshop was attended by about 30 participants belonging to Tanzania, Senegal, Bangladesh, Gambia, Uganda, Pakistan, Iran, Jordan, Sri Lanka, Kazakhstan, Libya, Turkey and Austria. Apart from the officials of COMSATS Headquarters, the workshop was attended by officials belonging to the World Bank and the United Nations Industrial Development Organization (UNIDO).

The workshop was inaugurated by Dr. Mustafa Çetintaş, Director TÜBİTAK UME, Turkey. He delivered the message of H.E. Dr. Hasan Mandal, President of The Scientific and Technological Research Council of Turkey (TUBITAK), Turkey. In his message, Dr. Mandal welcomed the foreign and local participants. He stated that metrology and quality infrastructure is critically important for the developing countries, which have applications in various fields including healthcare, public safety, environment, etc. The same can help the developing countries in manufacturing products for international and domestic markets and to improve the quality of life of their citizens. He shed light on the expertise of TUBITAK UME, which was established in 1992, and has over 200 researchers. He informed that Turkish exports increased six times during 1994 to 2015 due to the national quality infrastructure. He stated that Turkey, particularly TUBITAK, is ready to help other developing and least developed countries in upgrading their metrology infrastructure and human resource development.

During his opening remarks delivered via Skype, Dr. S. M. Junaid Zaidi, Executive Director COMSATS, shed light on the significance of metrology, standardization and quality infrastructure, which can help the developing and least developed countries in achieving industrial and economic development. He admired the progress made by Turkey in the afore-mentioned fields and hoped that the participants would be able to fully benefit from the expertise of TUBITAK UME and would replicate the same in their respective countries. He also shed light on the possible role of international organizations in facilitating the upgradation of metrology sectors and quality infrastructure in the countries of the South. He thanked TUBITAK UME for hosting the event and for providing warm hospitality to its participants.

The technical sessions of the workshop were preceded by the detailed presentation by Dr. Mustafa Çetintaş, Director TÜBİTAK UME, Turkey, on the status of Metrology in Turkey. Mr. Erkut Kırmızıoğlu, General Directorate for Standards and Metrology, Turkey, covered the Transformation of Turkey’s Legal Metrology System. Dr. Hüseyin Uğur, Consultant, World Bank, made a presentation on how Metrology Infrastructure can be developed in LDCs, while Mr. Pablo Davila, Industrial Development Officer, Standards and Quality Infrastructure Division, United Nations Industrial Development Organization (UNIDO), Austria, delivered UNIDO Perspective on Development of Quality Infrastructure in LDCs. It was noted that UNIDO has extended support to Sri Lanka, Mozambique, Nigeria and Iraq in building their National Metrology Institutes. UNIDO also extends support in capacity building and human resource development in the related fields.

The event also included the following presentations made by the participating experts and policy makers in the field of metrology belonging to COMSATS Member States: Development of Metrology in Sri Lanka (by Dr. Wijesinghe Mudiyanselage Sarath, Industrial Technology Institute, Sri Lanka); Implementation of the ISO 17025:2017 Standard in Metrology Laboratories (by Dr. Zhandos Baizhuma, Senior Lecturer, Al-Farabi Kazakh National University, Kazakhstan); Quality Infrastructure: Benefits, Application and Models for Development (by Ms. Ismat Gul Khattak, Quality Infrastructure Expert, Pakistan); Industrial Quality Infrastructure Requirements and the Role of Royal Scientific Society in Jordan (by Eng. Tareq Abdul-Aziz Ahmad Hasan, Vice President of Standards & Technology, Royal Scientific Society, Jordan); Role of the Jordan National Metrology Institute in Jordan (by Eng. Fawaz Najib AlLabadi, Director, Jordan National Metrology Institute, Jordan); Metrology and Clinical Laboratories (by Dr. M. Reza Bakhtiari, Researcher, Iranian Research Organization for Science and Technology, Iran); Metrology in Bangladesh (by Md. Jaydul Islam, Deputy Director (Metrology) and Quality Manager, Bangladesh Standards and Testing Institution, Bangladesh); Legal Metrology in The Gambia: Challenges and Constraints (by Mr. Cherno Njai, Controller, Weights and Measures Bureau, Ministry of Trade, The Gambia); LAME: African Laboratory of Metrology (by Mr. Lamine Diagne, Manager, Laboratoire Africain de Métrologie et d’Essais, Senegal); Industrialization in Tanzania and the Role of Metrology (by Mr. Twaya John Kalungwana, Metrologist, Tanzania Automotive Technology Centre, Tanzania); Challenges of Developing Metrology in Least Developed Countries – Uganda’s Experience (by Mr. Yasin Lemeriga, Manager, Uganda National Bureau of Standards, Uganda); and ASN and Metrology Activities (by Mr. Cheikh Boyo Ndiaye, Head Assistant of Division of Metrology, Senegalese Association for Standardization, ASN, Senegal).

These presentations highlighted the existing strengths/resources (manpower and technical infrastructure) as well as needs of the participating countries in the fields related to quality infrastructure, including Metrology, Standards, Accreditation and Conformity Assessment.

During the discussion session, the participants exchanged knowledge and know-how regarding various segments of quality infrastructure. Subsequently, the participants were divided into the following five working groups in order to prepare recommendations and roadmaps for upgradation of metrology sectors in the collaborating countries: (i) Funding for Development of Metrology; (ii) Traceability of Standards; (iii) Know-how Transfer; (iv) Creating Public Awareness about Metrology among Stakeholders; and (v) Human Resource Development and Knowledge Management.

The broad roadmap developed by the participants for the upgradation of metrology and quality infrastructure in the developing and least developed countries is given below:

  • The needs related to Technical Assistance, Traceability, Institutional Development, Funding and Stakeholder Management of collaborating countries to be determined in terms of study tours, trainings and consultancy.
  • Suitable providers/facilitators to be identified considering ease of access, transportation, communication as well as sustainability.
  • Cost Analysis of the needs to be conducted.
  • Technical Assistance, Traceability, Institutional Development, and Stakeholder Management programmes to be prepared considering needs, providers, as well as costs organized in terms of country and area in which assistance is needed.
  • Identification of funding sources, including UNIDO.
  • Implementation of the program through appropriate modules considering the availability of funds at a given period.
  • The developments to be reported to COMSATS Secretariat.
  • Regular updates and discussions regarding the developments in metrology in collaborating countries.

Other recommendations related to upgradation of quality infrastructure included: adequate financial support of the governments to metrology institutes; strengthening of Academia-Industry linkages; periodic briefings by heads of metrology institutes to policy makers in order to keep them abreast of the developments and to seek their support; involvement of private sector; proper role of media in highlighting the significance of these sectors; continuous capacity building opportunities to the manpower, etc.

While discussing the way forward, it was agreed that TUBITAK UME (with support from COMSATS) would conduct a survey among the participating countries in order to determine their common national needs of quality infrastructure. Subsequently, the participants would prepare proposals for joint projects in order to garner support from international agencies.

Upcoming Events

Oct
29
Tue
2019
The Fourth General Meeting of COMSATS, Accra, Ghana
Oct 29 all-day

COMSATS General Meeting is the apex forum that brings together the Heads of Member States (currently 27) for highest level policy guidelines and general direction for the organization’s programmes in pursuit of its mission. The first General Meeting of the Commission was held in 1994 that led to the establishment of COMSATS itself. Since then, two more meetings have been held in Islamabad (16-17 April 2012), and Accra (27-28 October 2015), respectively. The fourth General Meeting of the Commission convened by Hon. Nana Addo Dankwa Akufo- Addo, President of Ghana, is scheduled to be held on 29th October 2019, in Accra, Ghana.

For further details, please visit: www.accra-forum.org

Oct
30
Wed
2019
Accra Forum on Science and Technology for Sustainable Development, Accra, Ghana
Oct 30 all-day

The Accra Forum on S&T for Sustainable Development being organized under the patronage of COMSATS’ national focal point in Ghana, the Ghanaian Ministry for Education, Science, Technology, and Innovation will create awareness, share information on available mechanisms and tools for SDGs implementation, apart from recommending approaches to accelerate progress towards 2030 Global Agenda. During the Forum, Heads of State/Government and Ministerial-level officials; representatives from United Nation agencies and other international organizations; members of the diplomatic community; stakeholders from private sector, research organization; academia and media, through dialogues, debates and group meetings will deliberate upon the ways and means for effective translation of the Sustainable Development Goals (SDGs).

For further details, please visit: www.accra-forum.org

Nov
4
Mon
2019
5th COMSATS-ISESCO-INIT International Conference on Agriculture, Biotechnology and Food Security: Role of ICTs, Monastir, Tunisia
Nov 4 – Nov 6 all-day

Publications